Z-Flex Inc. is a major manufacturer of category 3 stainless steel venting material (AL29-4C). All of the stainless steel venting is a sealed vent pipe. The stainless steel vent pipe has a seal on one end inside the female end of the pipe. The vent pipe has a built in clamp on the female end also.
The seal on the inside of the 3" & 4" stainless venting keeps the vent pieces sealed when connecting them together. If there is ever a need to take the venting pieces apart then the gaskets would have to be replaced as they would be damaged by the prior heat and condensation.
Globaltowne has extra 3" & 4" replacement silicon seals in stock in case the venting has to be taken apart. These seals are required for all the stainless venting and prevent any gasses from getting out into the home.
Showing posts with label venting options. Show all posts
Showing posts with label venting options. Show all posts
Tuesday, March 12, 2013
Wednesday, April 15, 2009
Venting the Bosch 2700ES and 2400ES Tankless Heaters
There are three venting options for the Bosch 2700ES and Bosch 2400ES tankless water heaters.
For those who want to vent out of the side wall, the AQ3ES Horizontal Vent Kit has all of the parts needed (based on the assumption that you are venting out of the same wall you have mounted the heater on).
In addition to the 90 degree elbow, wall thimble, and the intake/exhaust termination boxes, this Z-Flex 3" stainless steel vent kit comes with enough vent pipe to meet the minimum three feet requirement. The Bosch warranty requires that all exhaust systems have at least three feet of straight vent pipe.
The ES VVT Vertical Vent Kit has all of the parts needed to vent up through the roof (except for the straight pipe). You will need enough straight pipe to get you three feet above your roofline.
The ES VVT Vent Kit comes with flashing, storm collar and rain cap for the roof line as well as a fire stop support, a stick of pipe, a 90 degree elbow, a vertical drain tee and a drain tube kit.
Lastly, the AQOK Outdoor Vent Kit turns the Bosch 2700ES/2400ES heaters into Outdoor Tankless Water Heaters. The AQOK Vent Kit bolts right on top of the heater to properly channel the makeup (combustion) air and the exhaust. The AQOK also prevents rain from getting into the tankless water heater.
With three venting options, the Bosch AquaStar 2700ES and Bosch AquaStar 2400ES heaters have the most versatility on the market!
Steve
In addition to the 90 degree elbow, wall thimble, and the intake/exhaust termination boxes, this Z-Flex 3" stainless steel vent kit comes with enough vent pipe to meet the minimum three feet requirement. The Bosch warranty requires that all exhaust systems have at least three feet of straight vent pipe.
The ES VVT Vent Kit comes with flashing, storm collar and rain cap for the roof line as well as a fire stop support, a stick of pipe, a 90 degree elbow, a vertical drain tee and a drain tube kit.
With three venting options, the Bosch AquaStar 2700ES and Bosch AquaStar 2400ES heaters have the most versatility on the market!
Steve
Subscribe to:
Posts (Atom)