TSTAT2 Wireless Remote Control for Bosch Tankless Heaters

The TSTAT2 Wireless Remote Control provides remote temperature control of your Bosch tankless water heater.

It will work with the Bosch AquaStar 2700ES and 2400ES tankless water heaters.

It will also work with the following obsolete Bosch AquaStar models: Bosch 250SX / 250SXO / 2400E / 2400EO.

The TSTAT2 also works with the following Bosch Therm models: 830ES / 940ES / 940ESO / C 1050ES / C 1210ES / C1210ESC.

And it works with the following obsolete Bosch wholesale tankless water heaters: 635ES / 635ESO / 715ES / 800ES / 920ES / 920ESC.

The TSTAT2 Wireless Remote Control is designed to remotely control just the temperature of your Bosch tankless water heater. It does not have a reset button.

Installation is quick and easy. It just requires opening up the control panel, dropping in a small circuit board and connecting the circuit board to the control panel mother board with a short connector wire. The installation manual describes the process of getting your TSTAT2 to sync with your Bosch hot water heater.

Multiple TSTAT2 wireless remotes can be sync'ed with the same Bosch water heater. Temperature control cannot be adjusted while the water heater is in use for safety reasons.

The Bosch wireless remote is great for controlling the output temperature of your tankless water heater if you have a jacuzzi or hot tub. It can also be handy if you want to crank up the water temperature when running certain appliances, such as your dishwasher.

Generally speaking, you want to set your water temperature at the lowest level that will provide you with hot enough water for your shower. The lower the water temperature, the faster the water flows through your Bosch tankless water heater. The faster the water flows through the heater, the less likely that you will experience any on/off cycles if your application flow rate is too near the minimum activation rate of your hot water heater.

Also, why heat up water too hot to use and then have to cool it down seconds later because it is too hot? Lowering the temperature will save you money. Having precise digital remote control of your Bosch tankless water heater's output temperature will allow you to minimize your natural gas or liquid propane consumption - and save you money! Plus , it's fun....

Steve

Bosch TSTAT2 Remote Control for Bosch 2700ES / 2400ES / 2400E / 2400EO

The Bosch TSTAT2 Remote Control for Bosch AquaStar 2700ES / 2400ES / 2400E / 2400EO / 250SX / 250SXO / 635ES Tankless Water heaters gives you the ability to remotely adjust the temperature of your Bosch Tankless Water Heater to a safe and comfortable level.

The TSTAT2 remote is particularly useful if you own a jacuzzi or hot tub that requires a hotter water temperature than you normally desire for regular shower use. Most people who own hot tubs want to fill them at a temperature that is higher than that normally used for comfortable showers. The TSTAT2 remote allows you to remotely raise the temperature when filling a hot tub and then drop the temperature back to a "normal" temperature -- usually between 105 and 112 degrees fahrenheit.

Please note that the electrical control of the Bosch AquaStar 2700ES / 2400ES / 2400E / 2400EO / 250SX / 250SXO / 635ES must be removed and opened in order to install the wireless receiver circuit board to enable the use of the TSTAT2 Wireless Remote Control.

The Bosch 2700ES and Bosch 2400ES tankless water heaters have been redesigned to make the installation of the wireless receiver circuit board much easier.

With the touch of a button, you can ensure an optimized heating output to suit everyone's needs!

Steve