Globaltowne has now added more replacement parts to our website. We carry a full line of Gas Lights, Half Frosted Globes, Preformed and Tie-On Mantles, etc. Globaltowne now carries some replacement parts such as the street elbow, wall plate assembly, heat deflector and more. Please see the items and part numbers listed below.
Heat Deflector #L5-17
Wall Plate Assembly #L8-6C
Street Elbow Pipe Fitting #L22-23A
3/8" x 1/8" fitting #L22-12A
Please call us at 888-726-9752 for further questions about the Humphrey Gas Light products or visit or website at www.globaltowne.com
Showing posts with label gas light accessories. Show all posts
Showing posts with label gas light accessories. Show all posts
Friday, September 25, 2015
Tuesday, October 29, 2013
Humphrey Indoor Gas Light Accessories
Globaltowne carries a full list of accessories and replacement parts for the Humphrey Indoor Gas Lights. We have large quantities of the Humphrey Indoor Gas Light Accessories, including replacement globes, preformed mantles, tie-on mantles, burner noses, nozzles and much more. Please see below for descriptions and a link to each part.
Humphrey Preformed Mantle L13-2 for Humphrey Gas Light Model 9 (1 Mantle). The Humphrey Preformed Mantle L13-2 is intended for use with all Model 9 Humphrey Indoor Gas Lights. Use only in stationary locations such as buildings (not recommended for recreational vehicles). The L13-2 preformed mantle is intended for use with burner nose L12-2A. Please note that Humphrey Indoor Gas Light part numbers that begin with 9T do not use preformed mantles. The Humphrey Preformed Mantles are also sold in packs of 6 and are L13-2-6PK (6 Mantles).
The Humphrey Tie-On Mantle L13-6 and sold as L13-6-5PK (5 Mantles) is intended for use with all of our Model 9T Humphrey Indoor Gas Lights. The L13-6 is intended for use with burner nose L12-11A. Please note that Humphrey Indoor Gas Light part numbers that begin with 9 (not 9T) do not use tie-on mantles. The Humphrey Tie-On Mantle also comes in a pack of 25 and is L13-6-25PK (25 mantles).
The Humphrey Clip-On Mantle L13-8 and sold as L13-8-5PK (5 mantles) is intended for use with all of our Model 9T Humphrey Indoor Gas Lights. The L13-8 is intended for use with burner nose L12-11A. Please note that Humphrey Indoor Gas Light part numbers that begin with 9 do not use clip-on mantles. The Humphrey Clip-On Mantle also comes in a pack of 25 and is L13-8-25PK (25 mantles).
The Humphrey OPK Pendant Kit is used for mounting all Humphrey Indoor Gas Lights to the ceiling. The pendant kit contains parts to mount 1, 2, or 3 gas lights. Please note that all gas lights are sold separately.
The Humphrey High Altitude Nozzle for Humphrey Gas Lights L9-52A is for use on all Humphrey Propane Gas Lights above 4,500 feet.
The Humphrey Replacement Burner Nose Seal L24-15-6PK (6 seals) is a gasket for use with either Burner Nose L12-2A or Burner Nose L12-11A. Please note that the replacement seal (L24-15) must be replaced anytime the burner nose is removed after the lamp has been used.
The Humphrey Bunsen L10-71A is the part between the nozzle and the burner nose. This part will work with both the Humphrey 9 and 9T series of Gas Lights.
Humphrey Indoor Gas Lights
Globaltowne now has all of the Humphrey Gas Lights in stock. We have large quantities of these Humphrey Indoor Gas Lights available in a variety of colors, including Rustic Walnut, Hunter Green, Pebble Gray and Natural Almond. We have both preformed mantle lights as well as tie-on mantle gas lights.
Below is a full list, model number and color of all the Humphrey Gas Lights:
Humphrey Gas Lights (Preformed Mantle)
Humphrey Gas Lights (Tie-On Mantle)
We also carry a large supply of Humphrey Gas Light Accessories, including preformed mantles, tie-on mantles and clip on mantles. We also carry burner noses, seals, spare globes and pendant kits.
Humphrey Gaslights are currently manufactured by Midstate Lamp, but in the past they were manufactured by Humphrey Products and by Paulin Products.
Subscribe to:
Posts (Atom)