Showing posts with label thermostat. Show all posts
Showing posts with label thermostat. Show all posts

Tuesday, October 22, 2019

ELM Aquastar 125VP Spare Parts

GlobalTowne currently has a few spare parts in stock for the older Aquastar 125VP.  This unit was manufactured by the company ELM Le Blanc out of France and distributed by Controlled Energy Corporation (CEC) out of Vermont.  The manufacturer has stopped making these units over 15-20 years ago.  Below is a list of spare parts GlobalTowne still has in stock.  Some of the parts are also good for the ELM Aquastar 80VP. 

Spare Parts:
#34343 - Complete Brass Water Valve
#22527 - Temperature Selector knob
#20849 (40931) - Thermostat Element Sensor
#20887 - Thermocouple
#02147 - NG Gas Pilot Injector
#37918 - Water Filter Screen
#34542 - Water Valve Piston & Spring
#22041 - Water Valve Retaining Screws
#27126 - Washer
#32570 - Water Valve Rubber Diaphragm
#21107 - Water Valve Pushrod

Please call GlobalTowne at 888-726-9752 for further questions or to place an order.


Friday, November 30, 2018

Ariston GL2.5 - GL4 Thermostat Retrofit Kit

Bosch Thermotechnology has recently stopped manufacturing the thermostat #65105602 (prior part #994062) for the older Bosch Ariston GL2.5 and the GL4 electric mini-tank water heaters.

Bosch has just released a Bosch Ariston GL2.5/GL4 Thermostat Retrofit Kit #7738006446 that comes with new plastic face pieces, heating element, anode rod, gasket and bolts and thermostat that will turn the older GL2.5 or GL4 into a new Bosch Tronic 3000T ES2.5 or Bosch Tronic 3000T ES4, respectively.

Bosch Ariston GL2.5/GL4 Thermostat Retrofit Kit #7738006446

The Bosch Ariston GL2.5/GL4 Thermostat Retrofit Kit can be used whenever there is an older Ariston GL2.5 or GL4 that needs a replacement thermostat.

Some Ariston GL2.5 and GL4 users are unable to simply replace their older electric mini-tank water heaters with the newer Bosch Tronic 3000T ES2.5 and ES4 units due to the slightly larger depth of the newer water heaters. The Bosch Tronic 3000T ES2.5 is .5" deeper than the older Ariston GL2.5 and the Bosch Tronic 3000T ES4 is 1.25" deeper than the older Ariston GL4.

Also, the Bosch Ariston GL2.5/GL4 Thermostat Retrofit Kit #7738006446 is less expensive than replacing the entire water heater.

The Bosch Ariston GL2.5/GL4 Thermostat Retrofit Kit cannot be used for the older Ariston P10S/P15S mini tank heaters.  Customer with these older model heaters will have to purchase a new Bosch Tronic 3000T ES2.5 or ES4.

Please call GlobalTowne at 888-726-9752 for further questions or to place an order.


Wednesday, November 15, 2017

Ariston Thermostat #65105602 Discontinued

[UPDATED 12/10/2018]

Please note that an Ariston GL2.5 - GL4 Thermostat Retrofit Kit #7738006446 is now available for sale through GlobalTowne!

Also, see our new blog entry on the Ariston GL2.5/GL4 Thermostat Retrofit Kit (#7738006446) replacement for the now-discontinued Ariston GL2.5/GL4 Thermostat #65105602 (old part #994062).

Call us for more details at 888-726-9752.

-------- Original Posting from 11/15/2017 --------

GlobalTowne would like to announce that the Ariston thermostat #65105602 has been discontinued.  This thermostat was good for Ariston models GL2.5/GL4/GL2.5Ti and GL4Ti.  GlobalTowne still has some stock of these thermostats but when they are gone there is no replacement available.  Bosch is currently putting together a retrofit kit with the manufacturer and would include the new GL2.5S/GL4S/ES2.5/ES4  thermostat #87387044410, new element, anode rod, cover and temperature control knob.  This retrofit kit is still under discussion and Bosch will announce the decision soon if they are going with the new kit.

Attached below is the list of part numbers, items, and visual of the items necessary to replace the older discontinued thermostat.

87387044390    Heating element
87387044410    Thermostat ES 2.5/4
87387044440    Temperature Knob
87387044460    Plastic Cover
87387044470    Anode Rod


Please call GlobalTowne at 888-726-9752 for further questions or to place an order.


Tuesday, July 26, 2016

Thermostats For Danfoss LX Electric Floor Mats

GlobalTowne carries a wide range of the Danfoss LX Electric Floor Heating Mats.  The mats come in either 110V or 240V.  There are 3 different thermostats for the Danfoss electric heating mats.  There are 2 programmable thermostats and 1 non-programmable thermostat. Please see the part numbers and specifications for each Danfoss thermostat below.
Danfoss LX Electric Thermostat 088L5133, (Non-Programmable):
Wall thermostat with Floor sensor, 40F to 104 F (5C to 40C)
15 amps (1800watts@120 or 3600watts@240)
4.65 x 3.0 x 1.9 inches

Danfoss LX Electric Thermostat 088L5130, (Programmable):
Wall thermostat with Floor sensor, 40F to 104 F (5C to 40C)
15 amps (1800watts@120 or 3600watts@240)
4.8 x 3.0 x 1.0 inches

Danfoss LX Electric Thermostat 088L5132, (Programmable):
Wall thermostat with Floor sensor, 40F to 104 F (5C to 40C)
15 amps (1800watts@120 or 3600watts@240)
4.8 x 3.0 x 1.0 inches


Wednesday, June 8, 2016

National Fuel's Western New York Conservation Incentive Program

The Conservation Incentive Program offers residential customers in National Fuel's western New York service area a number of money-saving rebates when they replace specified appliances with energy-efficient models.

There is a $700.00 rebate for all hot water boilers with an energy efficiency of .90 or higher.

There is a $375.00 rebate for all gas tankless water heaters with an energy efficiency of .82 or higher.

There is a rebate of $275.00 for all Indirect Bosch Stainless Steel Storage Tanks.

There is a rebate of $25.00 for the Bosch CRC100 & CRC200 Programmable Thermostat.

There is a rebate of $75.00 for the Bosch Wi-Fi Enabled Smart Controller.

Rebates are available for the following items listed below, providing they were installed on or after January 1, 2016.  All units are for Natural Gas (NG) and Liquid Propane (LP) unless otherwise specified.

Bosch Greenstar Boilers:
FS Combi 151, FS 151 Straight Boiler, WH Combi 151, WH 151 Straight Boiler, FS Combi 131, FS 131 Straight Boiler, WH Combi 131, WH 131 Straight Boiler, FS Combi 100, FS 100 Straight Boiler, WH Combi 100, WH 100 Straight Boiler, FS 79 Straight Boiler, WH 79 Straight Boiler, FS 57 Straight Boiler, WH 57 Straight Boiler.

Bosch Gas Tankless Water Heaters:
C1210ES, C1210ESC, C1050ES, C950ES, 940ES, 830ES

Takagi Gas Tankless Water Heaters:
TK-510C-NI, TK-310C-NI, TK110C-NI, T-D2-IN, T-D2-OS, T-D2U-IN, T-D2U-OS, T-H3J-OS, T-H3-OS, T-H3S-OS, T-K4-IN, T-K4-OS, T-K4U-IN, T-K4U-OS, T-KJr2-IN, T-KJr2-OS, T-KJr2U-IN-N, T-KJr2U-OS-N, T-M50-P, T-H3M-OS, T-H3-DV, T-H3S-DV, T-H3J-DV,

Marey Gas Tankless Water Heaters:
Power Gas GA16ETL, Power Gas GA16DP, Power Gas GA16, Power Gas GA10DP, Power Gas GA10, Power Gas GA5

Click here for more information on the National Fuel Conservation Incentive Program and to download the residential rebate application form.

NOTE: Rebates are available for existing single-family homes, multi-family homes, condominiums and mobile homes. New construction is not eligible for this program.




Monday, September 15, 2014

New Ariston "S" Series Replacement Parts

UPDATE 08/17/2023
Bosch Thermotechnology has recently changed the part number for the Bosch GL6+S/GL8TiS/ES8 Thermostat.  The old part number was 87387044420 and the new part number is 8738711261.  GlobalTowne carries this thermostat in stock and can be found at the link below:

GL6+S/GL8TiS/ES8 Thermostat 8738711261


GlobalTowne.com sells user replaceable spare parts for the New Ariston "S" Series Line of mini-tank electric water heaters.  Be sure to buy the correct parts -- one set of parts works for the New Ariston GL2.5S and GL4S models while another set of parts works for the Ariston GL6+S model.

For the Ariston GL2.5S and Ariston GL4S electric mini-tank water heaters we sell the replacement for the sacrificial Anode Rod #87387044470 (Old part #574305). This part can be used for the Ariston GL2.5/GL2.5S, Ariston GL4/GL4S, Airston GL2.5Ti/GL2.5TiS, GL4Ti/GL4TiS and Ariston ES2.5/ES4  mini-tank water heaters as well as for the now obsolete Ariston models P10S and P15S.



We also sell the Ariston GLSKIT which contains the sacrificial anode rod for the Ariston GL2.5S/GL4S Series (#87387044470) as well as the heating element (#87387044390) and the GLS gasket (#87387044500). This Kit can be used for the Ariston GL2.5S, Ariston GL4S, Airston GL2.5TiS, Ariston GL4TiS, ES2.5 and ES4 mini-tank water heaters.





We sell the Ariston GL6+S KIT which includes the element, anode rod, gasket and bolts.  This kit can also be used for the pro series heater Bosch Tronic 3000T ES8.


For the Ariston GL6+S electric mini-tank water heater we sell the replacement for the sacrificial Anode Rod (#87387044480) (Old number #570241). This slightly longer part can also be used for the Bosch Pro Ariston GL8Tiand ES8 mini-tank water heaters.


The new Ariston GL2.5S/GL4S take a new Wired Thermostat #87387044410.  The old part number was #7738002302.  This new wired thermostat can also be used for the GL2.5TiS/GL4TiS and the ES2.5/ES4.







The new Ariston GL6+S takes a new Wired Thermostat #87387044420. This new wired thermostat can also be used for the ES8.









Thursday, November 14, 2013

Danfoss Electric Floor Heating – LX Mats


LX Floor Heating Mats, 120V - 240V
Danfoss LX Electric Floor HeatingSystem (Self-Adhesive Mat & Thermostat) is an affordable luxury that brings warmth to life. It's a proven technology that is safe, reliable, and energy efficient. The unique adhesive system saves 70% on installation time!

• Pre-applied heating cable means even heat every time
• Dual-adhesive backing, no fastening required
• Single point connection
• Twin conductor cable
• Eliminates EMF’s (electromagnetic fields)
• Customize mat on the job site
• Minimal thickness-only adds 3/16” height to the floor
• Safety approved for wet locations (Under Showers)
• Even heat every time
• No fastening required
• Genuine ten year non-prorated warranty, includes labor and materials
• Do not cut the RED wire.


Danfoss Mats are easy to install.  They are best installed under tile, or other ceramic material as the heat transfer is excellent.  A layer of insulation should be installed below the mat.  A plywood sub floor can work for this as wood has poor heat transfer characteristics and will “force” the heat up to the more conductive ceramic.  Conductive heat, like electricity, will take the easiest path available whether is be up, down, or sideways.  Air, water, wood and other insulation's are poor heat conductors and thus block the movement of heat transfer. 
(Heated air rises with it's convection heat.)

Before installing the mats measure the space to be heated.  Be sure to measure the Square footage of any built-ins as well and subtract from the rooms actual square footage, no need to heat under cabinets or behind a toilet. Though you can heat under a tile shower stall.  Also, no need to measure from wall to wall as the heat will “migrate” 3-4 inches from the mat and you cannot walk or stand within 3-4 inches of a wall. Once the square footage is known, pick a mat or mats with LESS square footage than you need.  A mat that is too large will not be able to be installed as the heating wire CANNOT be cut, only the mat mesh can be cut.  If the square footage is 100, use a 90 sq. foot mat if is it 20, use the 17.5 square foot mat.
DO NOT CUT THE RED WIRE.

The Danfoss Warranty requires Ohm readings be listed on the warranty card. Measurements need to be done with an Ohm meter and taken before, during and after installation.  These readings insure that the wire has not been cut or nicked and will have the required resistance needed to heat the floor.  Please see the manual for the detailed instructions.

The mats come in 120 and 240 volts.  The smallest mats are 120 volts and the largest are 240 volts and there is an overlap in the middle sizes.  All the mats are 7 amps or less of current draw (amps).  Most home circuits are 15 amps, so this allows up to 2 mats per circuit.  Additional electrical circuits are required if more than two mats are needed.  The mats cannot be connected in series, this will result in very low wattage output and an unsatisfactory result for the home owner. However, it will not harm the mats.

Danfoss can provide thermostats for their mats.  The thermostats can be used with either 120 volts or 240 volts.  All the Thermostats can control 2 mats and the mats must be the same voltage.  DO NOT CONNECT A 240 VOLT AND 120 VOLT MAT TO THE SAME THERMOSTAT.

There are three Thermostats and a Power Module:
088L5130 – LX programmable Thermostat with Floor Sensor – MOST POPULAR
088L5132 – LX Programmable Thermostat with Air Sensor – Use with non-ceramic floors
088L5133 – LX Non-programmable Thermostat with Floor Sensor
088L5135 – Danfoss Power Module – Use with Programmable mats only

The Danfoss 088L5130 Thermostat should be used in most applications; kitchens, bathrooms entryways and sunrooms where ceramic or concrete floors are installed.  The thermostat is programmable.  It can be programmed for on/off times during the workweek and different on/off times for weekends. When setting the thermostat, it is set for the time you want the floor warm.  The Thermostat will “learn” how long it takes and turn it self on with enough time so that the floor is warm at the prescribed time. This will take a few on/off cycles to be accomplished or “learned”.  The thermostat is rated at 15 amps on either 120 volts or 240 volts.  The thermostat is also a Class A GFCI.  This protects humans and animals from a ground fault if a mat is damaged plus meets required codes for GFCI’s in bathrooms and kitchens where water faucets exist.
(A ground fault is when a damaged electrical circuit and water cross paths.  The GFCI senses the loss of current and immediately shuts off the circuit before a shock can happen.)

THE DANFOSS 088L5132 thermostat is used when an LX mat is put under a wooden floor, laminate floor or carpeted floor or when using floor heat as the main heating source in the home or apartment.  The Danfoss 088L5132 has an air sensor for primary control and a floor limiter so that the floor does not get too hot.  A wooden floor can be dried out using under floor heat.  Laminate floors and lose their adhesiveness if they get too warm. If these conditions exist the O88L5132 can be used, but the Danfoss O88L5130 should be the first choice of thermostats.

The Danfoss 088L5133 thermostat is the low end thermostat that is not programmable.  It is a manual thermostat that requires human intervention to turn on and off.  Best used in rooms that are not used on a daily basis or need heat on a daily basis.  The power module CANNOT be used with the Danfoss O88L5133 thermostat.

If more than 2 mats are needed for a specific area, the Danfoss power module can be added to the system to switch on another 1 or 2 mats.  The power module is connected to the 088L5130 or 088L5132 thermostat by two wires for the control.  The Power Module does need to have its own electrical circuit to power the mats. The power module also includes a Class A GFCI.  Up to 5 power modules can be used with a single Thermostat. Each mat provides up to 15 amps of switching capability, either 120 or 240 volts.  On a side note, the power module can switch a different voltage from the main thermostat.  For example, the thermostat can switch 120 volt mats and the power module can switch 240 volt mats.
DO NOT CONNECT a 240 volt AND 120 volt mat to the SAME POWER MODULE.

The Danfoss Little Buzzer or Continuity alarm is used during installation and will let the installer know if the electrical circuit is good.   If the heating cable is cut or damaged the Little Buzzer will sound an alarm.  Batteries ARE included with the DANFOSS “Little Buzzer”.


DO NOT CUT THE RED WIRE.


Monday, June 10, 2013

Ariston Anode Rod and Ariston GLKIT

Spare parts are available for he Ariston electric mini-tank water heaters. These spare parts are user-replaceable.

For the Ariston Gl2.5 and the Ariston GL4 mini-tank water heaters you can replace just the sacrificial GL Anode Rod (#574305) or you can get the Ariston GLKIT for the GL2.5 and Gl4 models. This GL KIT includes the GL Anode Rod (#574305) as well as the GL heating element (#994103) and the GL gasket (#994147).

The GL Anode Rod and the GL KIT will also work for the Ariston GL2.5Ti and GL4Ti mini-tank electric water heaters as well as the now-obsolete Ariston models P10S and P15S.


Similarly, for the Ariston GL6+ mini-tank water heater you can replace just the sacrificial GL6+ Anode Rod (#570241) or you can get the Ariston GL6+KIT for the GL6+ model.

Thursday, July 19, 2012

Bosch Wireless Remote Control TSTAT2

The Bosch Wireless Remote Control TSTAT2 for the Bosch AquaStar 2700ES / 2400ES / 2400E / 2400EO / 250SX / 250SXO allows you to program your Bosch tankless gas water heater to a comfortable and safe temperature from around your home from a distance of up to 98 ft.



The TSTAT2 remote is particularly useful if you own a jacuzzi or hot tub that requires a hotter water temperature than you normally desire for regular shower use.

Please note that the electrical control of the Bosch AquaStar 2700ES / 2400ES / 2400E / 2400EO / 250SX / 250SXO must be removed and opened in order to install the wireless receiver circuit board to enable the use of the TSTAT2 Wireless Remote Control.

The Newer Bosch models, 2700ES and Bosch 2400ES tankless water heaters have been redesigned to make the installation of the wireless receiver circuit board much easier. The circuit board is basically a plug and play unit.

The TSTAT2 controls the temperature of your water heater and does not have a reset button.   If the heater has an error then a code will be on the display of the heater and the user has to go to the heater to reset it from there and should document the error and then see if it returns after resetting.

The TSTAT2 Wireless Remote Control for Bosch 2700ES / 2400ES /2400E / 2400EO / 250SX / 250SXO features the following:

  • LCD displays temperature, error codes and functions
  • Temperature measured in °C or °F
  • Low battery level indicator
  • 98 feet user range
  • Alkaline AA LR6 2x1.5V battery power 915 MHz
  • Security lock function
  • IP X6 Protection
  • Priority function - temperature cannot be modified by other user interface when water is running

Don't forget to periodically change the two AA batteries in your Bosch wireless TSTAT2 thermostat as they will certainly corrode over time. The batteries in TSTAT2 thermostats that are kept in bathrooms will corrode faster than in other less humid environments, such as kitchens. Your batteries should be checked yearly for any signs of corrosion and replaced every five years in any case.