Tuesday, October 29, 2013

Humphrey Indoor Gas Light Accessories


Globaltowne carries a full list of accessories and replacement parts for the Humphrey Indoor Gas Lights. We have large quantities of the Humphrey Indoor Gas Light Accessories, including replacement globes, preformed mantles, tie-on mantles, burner noses, nozzles and much more.  Please see below for descriptions and a link to each part.


The Humphrey Half Frosted Pyrex Replacement Globe L6-20A is intended for use with all of our Model 9 and 9T Humphrey Indoor Gas Lights. The Humphrey Half Frosted Pyrex Replacement Globes are also sold in a pack of 6 Globes L6-20A-6PK (6 Globes).





Humphrey Preformed Mantle L13-2 for Humphrey Gas Light Model 9 (1 Mantle). The Humphrey Preformed Mantle L13-2 is intended for use with all Model 9 Humphrey Indoor Gas Lights.  Use only in stationary locations such as buildings (not recommended for recreational vehicles).  The L13-2 preformed mantle is intended for use with burner nose L12-2A.  Please note that Humphrey Indoor Gas Light part numbers that begin with 9T do not use preformed mantles.  The Humphrey Preformed Mantles are also sold in packs of 6 and are L13-2-6PK (6 Mantles).


The Humphrey Tie-On Mantle L13-6 and sold as L13-6-5PK (5 Mantles) is intended for use with all of our Model 9T Humphrey Indoor Gas Lights.  The L13-6 is intended for use with burner nose L12-11A.  Please note that Humphrey Indoor Gas Light part numbers that begin with 9 (not 9T) do not use tie-on mantles.  The Humphrey Tie-On Mantle also comes in a pack of 25 and is L13-6-25PK (25 mantles).





The Humphrey Clip-On Mantle L13-8 and sold as L13-8-5PK (5 mantles) is intended for use with all of our Model 9T Humphrey Indoor Gas Lights.  The L13-8 is intended for use with burner nose L12-11A.  Please note that Humphrey Indoor Gas Light part numbers that begin with 9 do not use clip-on mantles.  The Humphrey Clip-On Mantle also comes in a pack of 25 and is L13-8-25PK (25 mantles).



The Humphrey OPK Pendant Kit is used for mounting all Humphrey Indoor Gas Lights to the ceiling.  The pendant kit contains parts to mount 1, 2, or 3 gas lights.  Please note that all gas lights are sold separately.








The Humphrey High Altitude Nozzle for Humphrey Gas Lights L9-52A is for use on all Humphrey Propane Gas Lights above 4,500 feet.






The Humphrey Replacement Burner Nose Seal L24-15-6PK (6 seals) is a gasket for use with either Burner Nose L12-2A or Burner Nose L12-11A.  Please note that the replacement seal (L24-15) must be replaced anytime the burner nose is removed after the lamp has been used.





The Humphrey Bunsen L10-71A is the part between the nozzle and the burner nose.  This part will work with both the Humphrey 9 and 9T series of Gas Lights.






Humphrey Indoor Gas Lights


Globaltowne now has all of the Humphrey Gas Lights in stock.  We have large quantities of these Humphrey Indoor Gas Lights available in a variety of colors, including Rustic Walnut, Hunter Green, Pebble Gray and Natural Almond.  We have both preformed mantle lights as well as tie-on mantle gas lights.


Below is a full list, model number and color of all the Humphrey Gas Lights:

Humphrey Gas Lights (Preformed Mantle)
                  Humphrey Indoor Gas Light - Pebble Gray (9PG) 
                  Humphrey Indoor Gas Light - Hunter Green (9GR)   
                  Humphrey Indoor Gas Light - Natural Almond (9NA)     
                  Humphrey Indoor Gas Light - Rustic Walnut (9RW)   

Humphrey Gas Lights (Tie-On Mantle)

We also carry a large supply of Humphrey Gas Light Accessories, including preformed mantles, tie-on mantles and clip on mantles.  We also carry burner noses, seals, spare globes and pendant kits.

Humphrey Gaslights are currently manufactured by Midstate Lamp, but in the past they were manufactured by Humphrey Products and by Paulin Products.



Tuesday, October 8, 2013

Bosch Therm 330PN is the Direct Replacement for Bosch 1000P


The new Bosch Therm 330PN is the direct replacement for the retail model Bosch 1000P.  Bosch is no longer making the retail model heaters and is only selling wholesale versions.  The Bosch 330PN comes in either Natural Gas (NG) or Liquid Propane (LP).  The only difference between the 330PN and the retail model 1000P is the color of the front cover.  The 330PN has a silver cover as the older 1000P had a white cover.  All of the other specifications are the same.

Specifications for Bosch Therm 330PN:
  • Piezo ignition system requires no electrical connection
  • 78%+ thermal efficiency
  • 75,000 BTU maximum input
  • 3.3 gallons per minute capacity at 35F degree rise
  • Endless hot water for 1 application at a time
  • Minimum activation flow rate of 0.5 gallons per minute
  • Minimum of 30 psi water pressure required
  • High to low temperature control
  • Vents with 4" galvanized B vent – natural draft
  • Built for durability and serviceability with 15-year warranty and 20+ year life expectancy
  • Available in NG and LP models
The Bosch 330PN is also a good replacement heater for the older Aquastar 38B as they both are similar in BTU size and both take a 4" vent pipe.

The Bosch 330 PN could also replace the older Paloma PH6.  The 330 PN is 75K BTU and the PH6 was 43,800 BTU but both heater are good for small applications for camps and cottages.  The 330PN takes a 4" vent pipe like the PH6 did.  Please be aware that the 330PN requires a minimum of 30 psi of water pressure.

Friday, October 4, 2013

Service Bulletins for Older Bosch Aquastar Gas Tankless Water Heaters


Bosch has a series of service bulletins for the older retail model Bosch Aquastar and also the compact models such as the 1600P & 1600H.  These service bulletins can be very helpful with installation questions and when having issues with the Bosch tankless water heater.

Service bulletins can help with fixing an issue or with servicing your Bosch tankless water heater.  Please keep in mind and be safe when working on a gas appliance.  You can also contact Bosch directly or have you service agent contact Bosch technical support at 800-642-3111.